Amazon FSx

In case of usage of Virtual Appliance

Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
Use /home/stor2rrd/stor2rrd as the product home

Monitored scope is very limited, only Volumes, nothing else is provided via Amazon REST API.

The program uses REST API data from the storage.

Allow access from the STOR2RRD host to the Amazon FSx storage on port 443.
Test if ports are open:

$ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
  Connection to "192.168.1.1" on port "443" is ok

# Create stor2rrd user, enable REST API access
Cmode::> security login create -username stor2rrd -role vsadmin-readonly -application http -authmethod password

Cmode::> security login show -user-or-group-name stor2rrd
                                                                 Second
User/Group                 Authentication                 Acct   Authentication
Name           Application Method        Role Name        Locked Method
-------------- ----------- ------------- ---------------- ------ --------------
stor2rrd       http        password      readonly         no     none

Or you can use ONTAP System Manager to do the same:

Make sure that web services are started, again under admin account

Cmode::> system services web show
  External Web Services: true
                 Status: online
     HTTP Protocol Port: 80
    HTTPS Protocol Port: 443
           HTTP Enabled: true

Make sure storage firewall does not filter it:

Cmode::> firewall policy show -policy mgmt -instance -service http,https
  Vserver Name: Cmode
      Policy: mgmt
     Service: http
  Allowed IPs: 0.0.0.0/0
     IPspace: Default

  Vserver Name: Cmode
      Policy: mgmt
     Service: https
  Allowed IPs: 0.0.0.0/0
     IPspace: Default

Cmode::> net int show -vserver Cmode -lif cluster_mgmt
  --> interfaces must have: Firewall Policy: mgmt

STOR2RRD storage configuration

All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)
Add storage into configuration from the UI:
Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Amazon FSx
If you get errors such as "Missing LWP::Protocol::https", "Connection reset by peer" or "500 SSL negotiation failed" then follow this.
Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
```
$ df -g /home   # AIX
$ df -h /home   # Linux
```

Test storage connectivity, either from the UI or from the command line:

$ cd /home/stor2rrd/stor2rrd
$ ./bin/config_check.sh Amazon-FSx-01
  =====================================
  STORAGE: Amazon-FSx-01 : NetApp
  =====================================
  connection ok

Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)

$ crontab -l | grep load_netappperf.sh
$

Add if it does not exist as above

$ crontab -e

# Amazon FSx & NetApp FAS : C-mode, 7-mode, REST API (same code, use it just once)
0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_netappperf.sh > /home/stor2rrd/stor2rrd/load_netappperf.out 2>&1

Assure there is already an entry with the UI creation running once an hour in crontab

$ crontab -e

# STOR2RRD UI (just ONE entry of load.sh must be there)
5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1

Let run the storage agent for 15 - 20 minutes to get data, then:
```
$ cd /home/stor2rrd/stor2rrd
$ ./load.sh
```
Go to the web UI: http://<your web server>/stor2rrd/
Use Ctrl-F5 to refresh the web browser cache.