Installation

EMC monitoring: PowerMax VMAX VPLEX Unity DataDomain XtremIO Isilon ME4/ME5 ECS PowerStore PowerFlex


In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
This install procedure is identical for EMC VNX block and EMC CLARiiON CX4 storage devices.

Prerequisites

  • Allow access from the STOR2RRD host to the EMC storage service processors ports 6389,443 (TCP).
    Test if ports are open:
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 6389
      Connection to "192.168.1.1" on port "6389" is ok
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • Install EMC Navisphere Secure CLI. Download it from EMC support page:
    (Note: use always the latest version to avoid compatibility issues)
    • AIX download of Navisphere CLI (AIX) 7.33.9.1.84-1
      Install it as a lpp source, it will be installed into /usr/bin/naviseccli
      # smitty installp ➡ select actuall directory ➡ find package F4 ➡ install
      
    • Linux download of Navisphere CLI (Linux x64) 7.33.9.1.84-1
      It will be installed into /opt/Navisphere/bin/naviseccli)
      # rpm -i NaviCLI-Linux-64-x86-en_US-7.33.9.1.84-1.x86_64.rpm
      
    • Debian, Ubuntu packages:
      Use either Debian download or conver it via "alien" cmd
      # alien NaviCLI-Linux-64-x86-en_US-7.33.9.1.84-1.x86_64.rpm
        NaviCLI-Linux-64-x86-en_US-7.33.9.1.84-1.x86_64.deb generated
      
    During installation select low verifying level.
    In case you select "medium" then accept and store certificate during first manuall connection to the storage.

  • Create stor2rrd user on the storage (lpar2rrd on Virtual Appliance)
    Open the storage UI and navigate to storage ➡ settings ➡ user management ➡ local users ➡ add.
    Create user account stor2rrd with role operator.
    Do not use shell special characters like #!?|.*[]\{} in the password

  • Allow statistics logging on the storage
    UI ➡ Storage ➡ System properties ➡ Statistics logging ➡ yes

  • Configure naviseccli, on AIX use /usr/bin/naviseccli (lpar2rrd user on Virtual Appliance)
    User your own scope <0 - global; 1 - local; 2 - LDAP>
    # su - stor2rrd # (lpar2rrd user on the Virtual Appliance)
    $ /opt/Navisphere/bin/naviseccli -addusersecurity -scope 1 -password XXXXXXXXXXX -user stor2rrd 
    $ /opt/Navisphere/bin/naviseccli -h <storage controller IP/hostname> getcontrol -all
      System Fault LED:              OFF
      Statistics Logging:            ON
                    ...
    
    Statistics logging must be ON

    If you get bellow error assure you use right user/password combination and scope (loca/global/LDAP)
    $ /opt/Navisphere/bin/naviseccli -h <storage controller IP/hostname> getcontrol -all
      Error returned from the Management Server on 192.168.1.1
      Authentication failed. Possible reasons for failure are invalid security file, invalid username, password and/or scope.
    
    Remove user and define it again with different scope (like below) or user credentials:
    $ /opt/Navisphere/bin/naviseccli -RemoveUserSecurity 
    $ /opt/Navisphere/bin/naviseccli -addusersecurity -scope 0 -password XXXXXXXXXXX -user stor2rrd 
    
    If you have selected medium security level then accept and store certificate
    $ /opt/Navisphere/bin/naviseccli -h <storage controller IP/hostname> getsptime
      Unable to validate the identity of the server.  There are issues with the certificate presented.
      Only import this certificate if you have reason to believe it was sent by a trusted source.
      Certificate details:
      Subject:        CN=192.168.1.1,CN=VNX46EM_SPA,OU=CLARiiON
      Issuer: CN=192.168.1.1,CN=VNX46EM_SPA,OU=CLARiiON
      Serial#:        2c3c9999
      Valid From:     20140724193051Z
      Valid To:       20190723193051Z
      Would you like to [1]Accept the certificate for this session, [2] Accept and store ,[3] Reject the certificate?
      Please input your selection(The default selection is [1]):
      --> select "2"
    
      Time on SP A: 04/04/17 09:53:54
      Time on SP B: 04/04/17 09:49:00
    
    If you get below error then you probably use older NaviCLI 7.30.
    Upgrade to 7.33.8.1.19-1
    $ /opt/Navisphere/bin/naviseccli -h <storage controller IP/hostname> getcontrol -all
      Exception: End of data stream
    

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC VNX block
    EMC VNX block Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test the storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh 
      ===============================
      STORAGE: VNX-block_alias01: VNX
      ===============================
      first IP address : 192.168.1.2
      /opt/Navisphere/bin/naviseccli -h 192.168.1.2 getsptime
        Time on SP A: 11/03/16 12:56:45
        Time on SP B: 11/03/16 12:56:57
      connection ok
    
      second IP address : 192.168.1.3
      /opt/Navisphere/bin/naviseccli -h 192.168.1.3 getsptime
        Time on SP A: 11/03/16 12:56:47
        Time on SP B: 11/03/16 12:56:58
      connection ok
    
  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_vnxperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # EMC VNX storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_vnxperf.sh > /home/stor2rrd/stor2rrd/load_vnxperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home

Prerequisites

  • Allow access from the STOR2RRD host to the EMC storage on port 22 (do not use data mover IP!).
    Test if port is open:
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 22
      Connection to "192.168.1.1" on port "22" is ok
    
  • Create a user on the storage for download of perf data (lpar2rrd on Virtual Appliance)
    • user name: stor2rrd
    • expiration: 99999
    • CLI access allowed
    • roles: opadmin (operator)
    EMC Celerra note: use fullnas (nasadmin) role.

  • Create ssh-keys on STOR2RRD host under stor2rrd user if do not exist yet.
    It should already exist on the Virtual Appliance, skip it there.
    Type enter instead of passphrase
    # su - stor2rrd # (use lpar2rrd user on the Appliance)
    $ ls -l ~/.ssh/id_rsa.pub
    $ ssh-keygen -t rsa -N ""
      Generating public/private rsa key pair.
      Enter file in which to save the key (/home/stor2rrd/.ssh/id_rsa):
      ...
    $ ls -l ~/.ssh/id_rsa.pub
      -rw-r--r-- 1 stor2rrd stor2rrd 382 Jun  1 12:47 /home/stor2rrd/.ssh/id_rsa.pub
    
  • Copy ssh-key into the storage under storage stor2rrd
    $ scp ~/.ssh/id_rsa.pub stor2rrd@<storage controller>:/tmp/id_rsa.pub
    $ ssh stor2rrd@<storage controller>
      cat /tmp/id_rsa.pub >> ~/.ssh/authorized_keys
      rm /tmp/id_rsa.pub
      exit 
    
  • test connectivity, you should no be prompted for password:
    $ ssh -q stor2rrd@<storage controller> "export NAS_DB=/nas; nas_server -i server_2"
      EMC VNX Control Station Linux release 3.0 (NAS 7.1.79) 
      id      type  acl  slot groupID  state  name 
      1        1    0     2              0    server_2 
      2        4    0     3              0    server_3 
    

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC VNX file
    EMC VNX file Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh
      ==================================
      STORAGE: VNX-file_alias01e01: VNXF
      ==================================
      connection ok
    
  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_vnxfperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # EMC VNX for file storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_vnxfperf.sh > /home/stor2rrd/stor2rrd/load_vnxfperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home

Prerequisites

  • Allow access from the STOR2RRD host to the EMC storage on port 443 (HTTPS).
    Test if port is open:
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • EMC Unity Unisphere UEM CLI download
    https://www.dell.com/support/home/
    Download binaries is available for signed users ONLY. BTW no active support is needed.

    Identifying your product is necessary to access documentation ➡ choose any Unity model ➡ fresh version www.dell.com/support/home/en-us/product-support/product/unity-300/docs#q=UnisphereCLI&sort=relevancy&f:lang=[en]
    For signed-in accounts ➡ Choose any Unity model or enter SerialNumber ➡ Under “Drivers&Downloads” section www.dell.com/support/home/en-us/product-support/product/unity-300/drivers ➡ Filter with keyword “UnisphereCLI” ➡ Select Dell Unity Uninisphere UEM CLI (RedHat Linux 64-bit)
    EMC Unisphere Unity CLI download

  • Supported platforms (unfortunately there is no AIX support for UEM CLI as per November 2016 at least)
    • Linux RedHat
    • SuSE Linux
    • Solaris (x86 & Sparc)
    • Debian, Ubuntu package:
      Convert RedHat rpm package via "alien" cmd
      # alien UnisphereCLI-Linux-64-x86-en_US-4.0.1.1.3166-1.x86_64.rpm
        UnisphereCLI-Linux-64-x86-en_US-4.0.1.1.3166-1.i386.deb generated
      
  • EMC Unisphere API installation
    # umask 022
    # rpm -i UnisphereCLI-Linux-64-x86-en_US-4.0.1.1.3166-1.x86_64.rpm
    
  • Setting security level under root user:
    Note: The path has changed in recent UnisphereCLI, at least for UnisphereCLI-Linux-64-x86-en_US-5.2.1.1730628-1.x86_64.rpm:
    The installation is now under "/opt/dellemc", change bellow cmds accordingly
    # /opt/emc/uemcli/bin/setlevel.sh low
      Setting low verifying level.....
    
    You can even use "medium" level, then you have to accept and store certificate at the first connection.
    1. under root:
      # /opt/emc/uemcli/bin/setlevel.sh medium
        Setting medium verifying level.....
      
    2. under stor2rrd user (lpar2rrd on the Virtual appliance):
      # su - stor2rrd  # (lpar2rrd user on the Virtual Appliance)
      $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account show
        Remote certificate:
        Issuer:     CN=EMC-Unity
        Subject:    CN=EMC-Unity
        Valid from: 2016-07-15 09:54:57 Z
        Valid to:   2019-07-15 09:54:57 Z
        Serial:     0094aea927526b466e
        Id:         2595584890
        Would you like to:
          [1] Accept the certificate for this session
          [2] Reject the certificate
          [3] Accept and store
        Please input your selection (The default selection is [1]): 3
      
        Storage system address: 192.168.1.1
        Storage system port: 443
        HTTPS connection
        1:    ID   = user_admin
              Name = admin
              Role = administrator
              Type = local
      
    3. If the option "[3] Accept and store" is missing
      $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account show
        Remote certificate:
        Issuer:     CN=EMC-Unity
        Subject:    CN=EMC-Unity
        Valid from: 2016-07-15 09:54:57 Z
        Valid to:   2019-07-15 09:54:57 Z
        Serial:     0094aea927526b466e
        Id:         2595584890
        Would you like to:
          [1] Accept the certificate for this session
          [2] Reject the certificate
        Please input your selection (The default selection is [1]):
      
      It's necessary to set SecurityLevel to low
      There should be file /etc/uemcli_security.conf readable for root probably with "medium" security.
      SecurityLevel = medium
      
      Changing to low level should resolve it.
      SecurityLevel = low
      
      Then option "[3] Accept and store" should appear in the selection.

  • create user stor2rrd under operator role on the storage.
    You might skip it and use already existing account with minimal rights.
    Do not use shell special characters like #!?|$*[]\{}`"'& in the password, use ;:.+-%@ instead.
    Cmd returns "Error code: 0x6000068" if you do not pass them.

    Do not use directly /opt/emc/uemcli/bin/uemcli, use always /usr/bin/uemcli.
    If the package was converted with "alien", and after installation "/usr/bin/uemcli" - which should be a softlink - could not be found, you should create it manually
    ln -s /opt/dellemc/uemcli/bin/uemcli.sh /usr/bin/uemcli
    

    $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account show
      Storage system address: 192.168.1.1
      Storage system port: 443
      HTTPS connection
      1:    ID   = user_admin
            Name = admin
            Role = administrator
            Type = local
    ...
    
    $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account create -name stor2rrd -role operator -type local -passwd "Test2test_"
      Storage system address: 192.168.1.1
      Storage system port: 443
      HTTPS connection
    
      ID = user_stor2rrd
      Operation completed successfully.
    
  • Test storage connection for stor2rrd account:
    $ /usr/bin/uemcli -d 192.168.1.1 -u Local/stor2rrd -p "XXXXXX" /sys/general show -detail
      Storage system address: 192.168.1.1
      Storage system port: 443
      HTTPS connection
    
      1:    System name            = EMC-Unity
            Model                  = UnityVSA
            Platform type          = EMC Storage System
            System UUID            = 420FFE1D-0234-FD02-976E-9217DC6135ED
            License activation key = ELMEUV0716HN0K
            Product serial number  = VIRT162859DQXZ
            Health state           = OK (5)
            Health details         = "The system is operating normally."
    

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC Unity
    EMC Unity Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh
      =====================================
      STORAGE: EMC-Unity_alias01: UNITY
      =====================================
      connection ok
    
  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_unityperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # EMC Unity storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_unityperf.sh > /home/stor2rrd/stor2rrd/load_unityperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.

Troubleshooting

  • about 50% of performance counters are not working.
    You have probably hit into a Unity bug (926416/944550/9013962), upgrade Unity firmware to 4.2.2.x.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
Storage agent uses eithre the EMC Unisphere as data source, or the storage itself (that method works at least on 5978_711/0365 storage firmware and newer, most probaly even on olders)
EMC Unispheres 1.6.x, 8.x, 9.x and 10.x are supported.
Read why TDEVs are not monitored.

Prerequisites

  • Allow access from the STOR2RRD host to the EMC Unisphere or to the storage itself depends on mode you use on port 8443 (TCP).
    Test if port is open:
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 8443
      Connection to "192.168.1.1" on port "8443" is ok
    

EMC Configuration

EMC PowerMax monitoring scenarios

  • Unisphere (scenario 1)
    • Create user stor2rrd under "PerfMonitor" role on Unisphere.
      EMC VMAX user role

    • Allow statistics logging on the EMC Unisphere
      UI ➡ Performance ➡ Settings ➡ System Registrations ➡ Diagnostics ➡ On (Diagnostics interval 5 minutes)
      EMC Unisphere 1.6
      EMC Unisphere 1.6
      EMC Unisphere 8+
      EMC Unisphere 8

  • Direct storage attachment (scenario 2)
    • Connect on one of both PMAX e-management port and on the wheel on the top right corner
      EMC PowerMax monitoring cfg 1

    • Click “users and groups”, then “local users”, and then the “create” button
      EMC PowerMax monitoring cfg 2

    • Enter: The account name, description and Password 2 times (warning: both PMAX and stor2rrd have forbidden special characters and they are not the same)
      EMC PowerMax monitoring cfg 3

    • Choose the “perfmonitor” role
      EMC PowerMax monitoring cfg 4

    • Keep right access as “read only”
      EMC PowerMax monitoring cfg 5

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI, fill in Symmetrix ID for both scenarios
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC VMAX
    EMC VMAX2 Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh VMAX_alias01
      ===============================
      STORAGE: VMAX_alias01: VMAX
      ===============================
      connection ok
    
    Possible errors and solutions:
    • Error "Missing LWP::Protocol::https", "Connection reset by peer", "500 SSL negotiation failed": follow this.
    • Error "Array keys not found!": attach this VMAX through its local Unisphere


  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_vmaxperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # VMAX storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_vmaxperf.sh > /home/stor2rrd/stor2rrd/load_vmaxperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
STOR2RRD storage agent uses these EMC VPLEX APIs:
  • Performance data via ssh: default VPLEX data collectors available through ssh (port 22) : read only access
  • Configuration data via REST API: VPLEX Element Manager API (port 443)

Storage access options

  • VPLEX 5 full admin access
  • VPLEX 5 non storage UI neither VPLEXcli access
    This kind of access requires only ssh access to VPLEX management host to get files with perf data.
    This will miss in data then:
    • Host section
    • Host mapping (HOST vrs Volume relationship)
    • Host TOP
    • Health status
    • Capacity
  • VPLEX 6 access under vplexuser role

Prerequisites

  • Allow access from the STOR2RRD host to the VPLEX on ports 22 & 443 (TCP).
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 22
      Connection to "192.168.1.1" on port "22" is ok
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • Create user stor2rrd on the VPLEX host under "users" group and exchange ssh-keys.
    This will allow download perfromance data and some basic configuration.
    Use vplexuser role on VPLEX 6.
    You can also use user/password ssh credentials in STOR2RRD UI instead of ssh-keys.
    • Create ssh keys if it does not exist yet in /home/stor2rrd/.ssh/id_rsa (type enter instead of passphrase)
      $ ssh-keygen -t rsa -N ""
        Generating public/private rsa key pair.
        Enter file in which to save the key (/home/stor2rrd/.ssh/id_rsa):
        ...
      
    • Create stor2rrd user via VPlexcli under admin priviliges
      # ssh service@VPLEX01
      
      service@VPLEX01:~> vplexcli 
          Trying ::1... 
          Connected to localhost. 
          Escape character is '^]'. 
          Enter User Name: admin 
          Password: 
      
      • VPLEX5
        VPlexcli:/> user add -u stor2rrd
          admin password: 
          New password: 
          Confirm password: 
        
      • VPLEX6
        User creation with role assigment
        VPlexcli:/> user add -r vplexuser -u stor2rrd
          Enter admin password:
          Enter password for stor2rrd:
          Confirm password for stor2rrd:
        
        Allow shell access
        VPlexcli:/> cd /management-server/users/local/stor2rrd/
        VPlexcli:/management-server/users/local/stor2rrd> set shell-access true
          Enter admin password:
        
        user rights
        VPlexcli:/> ll /management-server/users/local/stor2rrd/
          Name          Value
          ------------  --------
          role-name     vplexuser
          shell-access  true
          user-name     stor2rrd
        
    • Exchange ssh keys
      $ ssh-copy-id stor2rrd@vplex01
      
    • Test connection, you should login without typing of password:
      $ ssh vplex01 -l stor2rrd
      stor2rrd@VPLEX01:~> exit
      
      You have to end up in shell! If you end up in VPLEX CLI then it is wrong, use above "set shell-access true" cmd.
      UI access to https://vplex01 as stor2rrd does not work

    • Allow access to the storage UI (via REST API) under admin priviliges on VPLEX 5
      If you do want to allow it then it will work but without this data:
      • Host section
      • Host mapping (HOST vrs Volume relationship)
      • Host TOP
      • Health status
      • Capacity

    • VPLEX 6 apparently starts VPLEXcli automatically after log on.
      This must be disabled to allow login only to operating system.
      There is a way (perhaps commenting out starting VPLEXcli in .bash_profile or something like that), not sure here as for now.

  • Make sure that all monitors we use are running (collecting data), they are all default monitors and should run:
    VPlexcli:/> ll /monitoring/directors/*/monitors/
      /monitoring/directors/director-1-1-A/monitors:
      Name                                                            Ownership  Collecting  Period  Average  Idle   Bucket  Bucket  Bucket  Bucket
      --------------------------------------------------------------  ---------  Data        ------  Period   For    Min     Max     Width   Count
      --------------------------------------------------------------  ---------  ----------  ------  -------  -----  ------  ------  ------  ------
      director-1-1-A_PERPETUAL_vplex_sys_perf_mon_v19                 true       true        5s      4.97s    2s     -       -       -       64
      director-1-1-A_VIRTUAL_VOLUMES_PERPETUAL_MONITOR                true       true        1min    1min     33s    -       -       -       64
    
      /monitoring/directors/director-1-1-B/monitors:
      Name                                              Ownership  Collecting  Period  Average  Idle  Bucket  Bucket  Bucket  Bucket
      ------------------------------------------------  ---------  Data        ------  Period   For   Min     Max     Width   Count
      ------------------------------------------------  ---------  ----------  ------  -------  ----  ------  ------  ------  ------
      director-1-1-B_PERPETUAL_vplex_sys_perf_mon_v19   true       true        5s      5.05s    4s    -       -       -       64
      director-1-1-B_VIRTUAL_VOLUMES_PERPETUAL_MONITOR  true       true        1min    60s      33s   -       -       -       64
      ...
    
    If some do not running then use this procedure to enable it.

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC VPLEX
    EMC VPLEX Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh EMC-VPLEX-01
      ===============================
      STORAGE: EMC-VPLEX-01: VPLEX
      ===============================
      connection ok
    
    If you get an error about missing LWP::Protocol::https then install as per this manual

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_vplexperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # VPLEX storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_vplexperf.sh > /home/stor2rrd/stor2rrd/load_vplexperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home

EMC VNXe support

STOR2RRD supports these EMC SAN/NAS VNXe storage:
  • EMC VNXe 1600
  • EMC VNXe 3200
STOR2RRD does not support EMC VNXe series1 models which do not have block implementation:
  • EMC VNXe 3100
  • EMC VNXe 3150
  • EMC VNXe 3300
Such storage do not provide performance data.

Prerequisites

  • Allow access from the STOR2RRD host to the EMC storage service processors on port 443 (TCP).
    Test if port is open:
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • EMC VNXe Unisphere UEM CLI download
    If you have also EMC Unity in place then use EMC Unity UEM CLI which works also for VNXe.
    EMC VNXe UEM CLI does not support Unity.
    https://support.emc.com/downloads
    VNX/VNXe family ➡ VNXe1/2 series ➡ ADD-ONS ➡ More ➡ VNXe Unisphere CLI ➡ Linux 64-bit

  • Supported platforms (unfortunatelly there is no AIX support for UEM CLI as per November 2016 at least)
    • Linux RedHat
    • SuSE Linux
    • Solaris (x86 & Sparc)
    • Debian, Ubuntu package:
      Convert RedHat rpm package via "alien" cmd
      # alien UnisphereCLI-Linux-64-x86-en_US-4.0.1.1.3166-1.i386.rpm
        UnisphereCLI-Linux-64-x86-en_US-4.0.1.1.3166-1.i386.deb generated
      
  • EMC Unisphere API installation
    # umask 022
    # rpm -i UnisphereCLI-Linux-64-x86-en_US-4.0.1.1.3166-1.x86_64.rpm
    
  • Setting security level under root user:
    # /opt/emc/uemcli/bin/setlevel.sh low
      Setting low verifying level.....
    
    You can even use "medium" level, then you have to accept and store certificate at the first connection.
    1. under root:
      # /opt/emc/uemcli/bin/setlevel.sh medium
        Setting medium verifying level.....
      
    2. under stor2rrd user:
      $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account show
        Remote certificate:
        Issuer:     CN=EMC-Unity
        Subject:    CN=EMC-Unity
        Valid from: 2016-07-15 09:54:57 Z
        Valid to:   2019-07-15 09:54:57 Z
        Serial:     0094aea927526b466e
        Id:         2595584890
        Would you like to:
          [1] Accept the certificate for this session
          [2] Reject the certificate
          [3] Accept and store
        Please input your selection (The default selection is [1]): 3
      
        Storage system address: 192.168.1.1
        Storage system port: 443
        HTTPS connection
        1:    ID   = user_admin
              Name = admin
              Role = administrator
              Type = local
      
  • create user stor2rrd under operator role on the storage.
    You might skip it and use already existing account with minimal rights.
    Do not use shell special characters like #!?|.*[]\{} in the password.
    Cmd returns "Error code: 0x6000068" if you do not pass them.
    Do not use directly /opt/emc/uemcli/bin/uemcli, use always /usr/bin/uemcli.
    $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account show
      Storage system address: 192.168.1.1
      Storage system port: 443
      HTTPS connection
      1:    ID   = user_admin
            Name = admin
            Role = administrator
            Type = local
    ...
    
    $ uemcli -d 192.168.1.1 -u Local/admin -p "XXXXXX" /user/account create -name stor2rrd -role operator -type local -passwd "Test2test_"
      Storage system address: 192.168.1.1
      Storage system port: 443
      HTTPS connection
    
      ID = user_stor2rrd
      Operation completed successfully.
    

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC VNXe
    EMC VNXe Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh
      =====================================
      STORAGE: EMC-VNXe_alias01: VNXE 
      =====================================
      connection ok
    
  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_vnxeperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # EMC VNXe storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_vnxeperf.sh > /home/stor2rrd/stor2rrd/load_vnxeperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
Storage agent uses EMC Data Domain CLI accessed via ssh to get all necessary data from the storage.
EMC DataDomain firmware versions 5.5+ and 6.x are supported.
EMC DataDomain firmware versions 7.x+ is supported since STOR2RRD v2.70.
EMC DataDomain 6.0.2.50+ and 6.1.2.40+ (6.2 is not affected) do not provide disk stats community.emc.com/docs/DOC-78887

Prerequisites

  • Allow access from the STOR2RRD host to the EMC storage on port 22 (TCP).
    Test if port is open:
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 22
      Connection to "192.168.1.1" on port "22" is ok
    
  • create user stor2rrd under user role on the storage.
    EMC DataDomain user screenshot

  • Exchange ssh keys
    Print public key:
    $ cat .ssh/id_rsa.pub
      ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDPpQlm0Z/x1X4txd2GgZgvg1Fm7QHeusQ6LqBp/Sb1doAoiDmXErk+lNY27aJAqb4YiGnqejioqCJ9N93NiKpffxH+L3
    
    Log on to the storage and add above key:
    $ ssh <data domain host> -l stor2rrd
      stor2rrd@data_domain_host> adminaccess add ssh-keys
        Enter the key and then press Control-D, or press Control-C to cancel.
        ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDPpQlm0Z/x1X4txd2GgZgvg1Fm7QHeusQ6LqBp/Sb1doAoiDmXErk+lNY27aJAqb4YiGnqejioqCJ9N93NiKpffxH+L3
    
    Test connection:
    $ ssh <data domain host> -l stor2rrd
      EMC Data Domain Virtual Edition
      Welcome to Data Domain OS 6.1.0.11-571028
    

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC DataDomain
    EMC DataDomain Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh EMC-DataDomain01_alias01
      =====================================
      STORAGE: EMC-DataDomain01_alias01: DATADOMAIN
      =====================================
      connection ok
    
  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_datadomainperf.sh 
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # EMC DataDomain storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_datadomainperf.sh > /home/stor2rrd/stor2rrd/load_datadomainperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.

Troubleshooting

  • data collection stuck, no performance data, this can be found in log
    $ tail logs/error.log-<DD alias>
      Tue Mar 21 19:57:07 2023 command: filesys show compression '/data/xxxx/xxxx' timed out after: 600 seconds /home/stor2rrd/stor2rrd/bin/datadomainconf.pl:1669 : Interrupted system call
    
    It is a known issue when on some DD firmwares hang this cmd:
    mtree show compression
    
    workaround: disable that cmd via this setting, you will not have mtree stats, but rest will work
    su - stor2rrd
    cd /home/stor2rrd/stor2rrd
    umask 022
    echo "export MTREE_COMPRESSION_STATISTICS_EXCLUDE=\"storage1 storage2 storage3\"" >> etc/.magic
    
  • DD refuses some ssh sessions, you can find in STOR2RRD log (logs/error.log-<storage alias>) this:
    Error: Unable to connect to remote machine (dd01) : No such file or directory
    Error: Error command: ssh login failed  unable to load Perl module IO::Pty: Can't locate IO/Pty.pm ...
    
    Increase DataDomain parameter login-max-active, stor2rrd ssh sessions are in conjuction with normal backup sessions.
    sysadmin@dd(active:0)# adminaccess option show login-max-active.
      Adminaccess option "login-max-active" set to "150".
    sysadmin@dd(active:0)# adminaccess option set login-max-active 500
      Adminaccess option "login-max-active" set to "500".
    
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
Isilon v7.x, v8.x and v9.x firmwares are supported.
When you use Isilon v9.x then just use one Management IP Address from the Cluster (do not use direct Node's IPs).
The product uses EMC Isilon REST API interface natively provided by the storage to get all necessary data.

Storage connectivity

  • Allow access from the STOR2RRD host to the EMC storage on port 8080.
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 8080
      Connection to "192.168.1.1" on port "8080" is ok
    
  • Create user stor2rrd on the storage with new read-only role called stor2rrd.
    $ ssh -l admin 192.168.1.1
    isilon01-1% isi auth users create stor2rrd --enabled yes --password-expires no --password XXXXXXX
    isilon01-1% isi auth roles create --name stor2rrd --description "Read-only role for STOR2RRD"
    isi auth roles modify stor2rrd --add-user=stor2rrd --add-priv-ro=ISI_PRIV_EVENT --add-priv-ro=ISI_PRIV_LOGIN_PAPI --add-priv-ro=ISI_PRIV_STATISTICS --add-priv-ro=ISI_PRIV_SMARTPOOLS --add-priv-ro=ISI_PRIV_DEVICES --add-priv-ro=ISI_PRIV_QUOTA
    
    EMC Isilon user role

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC Isilon
    EMC Isilon Storage management

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh isilon-alias01
      =====================
      STORAGE: isilon-alias01 : ISILON
      =====================
      connection ok
    
    If you get an errors like "Missing LWP::Protocol::https", "Connection reset by peer" or "500 SSL negotiation failed" then follow this.

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_isilonperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # Dell EMC Isilon
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_isilonperf.sh > /home/stor2rrd/stor2rrd/load_isilonperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
The product uses REST API natively provided by EMC XtremIO XMS management module to get all necessary data.

Storage connectivity

  • Allow access from the STOR2RRD host to the EMC storage on port 443 (https)
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • Create user stor2rrd in storage XMS with role Read-Only
    EMC XtremIO user create

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ XtremIO
    EMC XtremIO Storage management

  • You have to define each monitored cluster separately.

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh xtremio-XIO-01-alias01
      =====================
      STORAGE: xtremio-XIO-01-alias01 : XTREMIO
      =====================
      connection ok
    
    If you get an errors like "Missing LWP::Protocol::https", "Connection reset by peer" or "500 SSL negotiation failed" then follow this.

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_xtremioperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # Dell EMC XtremIO
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_xtremioperf.sh > /home/stor2rrd/stor2rrd/load_xtremioperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.

Troubleshooting

  • No performance data in STOR2RRD UI:
    Check storage XMS console if it has performance data in its graphs.
    if not then contact Dell EMC support.
    As soon as data appears in XMS console then STOR2RRD starts working as well

In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
The product uses EMC ME4 SMI-S and WBI API interfaces natively provided by the storage.

Note: storage firmware GT280R010-01 does not provide data via SMI-S (up to GT280R009-02 it is fine), it is a confirmed issue in the storage firmware (SR #14853424). Upgrade to GT280R011-01 or use WBI access method.

Storage connectivity

  • Allow access from the STOR2RRD host to the storage on ports 80 (WBI) and 5988 (SMI-S).
    If you use https and secure SMI-S then test ports 443 and 5989 instead.
    If you use storage cmd line configuration like in examples below (you can use the storage UI instead) then port 22 (ssh) must be open.
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 5989
      Connection to "192.168.1.1" on port "5989" is ok
    
  • Make sure that secure SMI-S (port 5989) and WBI HTTPS (port 443) protocols are enabled on the storage
    • CMD line:
      $ ssh -l manage <storage_hostname>
      # show protocols
        Service and Security Protocols
        ------------------------------
        Web Browser Interface (HTTP): Enabled
        Secure Web Browser Interface (HTTPS): Enabled
        Command Line Interface (Telnet): Disabled
        Secure Command Line Interface (SSH): Enabled
        Storage Management Initiative Specification (SMI-S): Enabled
        Unsecure Storage Management Initiative Specification (SMI-S 5988): Disabled
        ...
      
      If secure SMI-S or WBI HTTPS are not enabled:
      # set protocols smis enabled
      # set protocols https enabled
      
    • UI:
      Storage service management
  • Create user stor2rrd on the storage with monitor and standard roles, allow SMI-S and WBI.
    • CMD line method:
      Adjust password to your preferred one from used Test1234.
      $ ssh -l manage <storage_hostname>
      # create user interfaces smis,wbi locale English password Test1234 roles monitor,standard stor2rrd
      
    • UI:
      Storage user management
    Note for newer firmwares role "standard" is necessary for WBI access.

Install prerequisites

Skip that in case of Virtual Appliance
  • Linux:
    Install sblim-wbemcli package:
    # yum list |grep sblim-wbemcli
      sblim-wbemcli.x86_64                       1.6.2-9.el7                 base
    # yum install sblim-wbemcli     # RedHat
    # apt-get install sblim-wbemcli # Debian based (Ubuntu etc)
    # /usr/bin/wbemcli -noverify -nl ei https://<storage_hostname>:5988/root/dsh:cim_computersystem
      *
      * ./wbemcli: Http Exception: Username/password required.
      *
    
    If you prefere to use https on port 5989 then you must use wbemcli with this patch 0002742
    Download the package from:
    Test the package:
    # rpm -q sblim-wbemcli
      sblim-wbemcli-1.6.3-31.1.x86_64
    # /usr/bin/wbemcli -v
      * wbemcli Version 1.6.3
    # /usr/bin/wbemcli -noverify -nl ei http://<storage_hostname>:5988/root/dsh:cim_computersystem
      *
      * ./wbemcli: Http Exception: Username/password required.
      *
    
  • AIX:
    Download and install
    # rpm -Uvh libffi-3.1-1.aix5.1.ppc.rpm --nodeps
    # rpm -Uvh libiconv-1.14-2.aix5.1.ppc.rpm --nodeps
    # rpm -Uvh libidn-1.29-1.aix5.1.ppc.rpm --nodeps
    # rpm -Uvh libssh2-1.4.3-2.aix5.1.ppc.rpm --nodeps
    # rpm -Uvh openssl-1.0.1j-1.aix5.1.ppc.rpm
    # rpm -Uvh openldap-2.4.23-0.3.aix5.1.ppc.rpm
    # rpm -Uvh curl-7.27.0-1.aix5.1.ppc.rpm
    # rpm -Uvh wbemcli-1.6.3-1.aix5.1.ppc.rpm
    
    # LIBPATH=/opt/freeware/lib; export LIBPATH
    # /opt/freeware/bin/wbemcli -noverify -nl ei http://<storage_hostname>:5988/root/dsh:cim_computersystem
      *
      * ./wbemcli: Http Exception: Username/password required.
      *
    

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC ➡ PowerVault ME4 ➡ SMI-S
    Dell EMC ME4 SMI-S Storage management

    If you set https in above storage properties then this must be enabled on the storage:
    $ ssh -l manage <storage_hostname>
    # show protocols
      ...
      Secure Web Browser Interface (HTTPS): Enabled
      Storage Management Initiative Specification (SMI-S): Enabled
      ...
    
    If you use http then this:
      Web Browser Interface (HTTP): Enabled
      Unsecure Storage Management Initiative Specification (SMI-S 5988): Enabled
    
  • Do not use shell special characters like @:;#!?|$*[]\{}`"'& in the password, use rather .+-=_% instead.

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh 
      =====================
      STORAGE: EMC-ME4 : DOTHILL
      =====================
      connection ok
    
    If you use HTTPS and do not have installed Perl SSL support then you get an error:
    "Missing LWP::Protocol::https", "Connection reset by peer" or "500 SSL negotiation failed"
    Follow this or switch to HTTP on the storage line in etc/storage-list.cfg.

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_dothillperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # DotHill Make suredSAN and its rebrands like Lenovo S2200 or HPE MSA2000/P2000, Dell EMC PowerVault ME4 Series, Quantum StorNex
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_dothillperf.sh > /home/stor2rrd/stor2rrd/load_dothillperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.

Troubleshooting

  • Make sure SMI-S is working for user stor2rrd. Adjust password and storage_hostname in example below:
    $ /usr/bin/wbemcli -nl -t -noverify ein 'http://stor2rrd:<password>@<storage_hostnamew>:5988/root/dsh:SMI_Controller'
      192.168.1.1:5988/root/smis:SMI_Controller.Name="208000c0ff261f53:A",CreationClassName="SMI_Controller"
      192.168.1.2:5988/root/smis:SMI_Controller.Name="208000c0ff261f53:B",CreationClassName="SMI_Controller"
    
    When it does not work then check user rights of stor2rrd user (must have "smis"), network visibility (firewall), user/password combination.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
STOR2RRD relies on the EMC ECS Rest API to collect performance data.
All data is downloaded from VDC nodes.

Storage connectivity

  • Allow access from the STOR2RRD host to each EMC ECS VDC node on port 4443
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 4443
      Connection to "192.168.1.1" on port "4443" is ok
    
  • Create Storage Management user "stor2rrd" with System Monitor role on each monitored VDC.

STOR2RRD storage configuration

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC : Elastic Cloud Storage
    EMC ECS Storage management

    The addition of a VDC to ECS configuration is intended as choosing specific VDC you want to display in Stor2rrd GUI.
    To monitor your chosen VDC, just set one or two nodes which are management EndPoint for a given VDC.
    No need to add every node in VDC

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_ecsperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # Dell EMC ECS
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_ecsperf.sh > /home/stor2rrd/stor2rrd/load_ecsperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
The product uses REST API natively provided by EMC PowerStore storage to get all necessary data.

Note the issue with PowerStore firmware 3.0.0.1, upgrade to 3.2.1.0.

Storage connectivity

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ EMC:PowerStore
    EMC PowerStore Storage management PowerStore

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh PowerStore01
      =====================
      STORAGE: PowerStore01 
      =====================
      connection ok
    
    If you get an errors like "Missing LWP::Protocol::https", "Connection reset by peer" or "500 SSL negotiation failed" then follow this.

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_powerstoreperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # Dell EMC PowerStore
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_powerstoreperf.sh > /home/stor2rrd/stor2rrd/load_powerstoreperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
STOR2RRD collects preformance and configuration data from the PowerFlex Gateway using REST API.

Storage connectivity

  • Allow access from the STOR2RRD host to the PowerFlex Gateway on port 443
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      TCP connection to "192.168.1.1" on port "443" is ok
              
  • Create a new user for STOR2RRD with the 'Monitor' role
    • Login to the primary MDM server as 'root'
    • Login to PowerFlex SCLI as administrator
      scli --login --username admin
                
    • Create new user for STOR2RRD User will be created with a temporary password which needs to be changed during the first login
      scli --add_user --username stor2rrd --user_role Monitor
                
    • Login to PowerFlex SCLI with the new user credentials and set new password
      scli --login --username stor2rrd
      scli --set_password
                

STOR2RRD storage configuration

  • Add storage to STOR2RRD configuration:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC : PowerFlex
    EMC PowerFlex Storage management

  • Add PowerFlex storage agent to crontab if it does not exist.
    • Login to STOR2RRD appliance as 'stor2rrd' or 'lpar2rrd' if you are on our Virtual Appliance
    • Check crontab for PowerFlex agent entry:
      $ crontab -l | grep load_powerflexperf.sh
      $
                
    • Add the entry if it does not exist
      $ crontab -e
      
      # PowerFlex
      0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_powerflexperf.sh > /home/stor2rrd/stor2rrd/load_powerflexperf.out 2>&1
                
  • Let the storage agent run for 15 - 20 minutes to collect some data
    Then run the load script to populate STOR2RRD UI with data:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
          
  • Login to STOR2RRD web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
The product uses storage WBI API interfaces natively provided by the storage.
WBI access must be used on new storage models which do not support SMI-S protocol.
Note: WBI API access method is supported since STOR2RRD v7.70.

Storage connectivity

  • Allow access from the STOR2RRD host to the storage on ports 443.
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • Make sure that secure and WBI HTTPS (port 443) protocol is enabled on the storage
    • CMD line:
      $ ssh -l manage <storage_hostname>
      # show protocols
        Service and Security Protocols
        ------------------------------
        ...
        Secure Web Browser Interface (HTTPS): Enabled
        ...
      
      If secure WBI HTTPS is not enabled:
      # set protocols https enabled
      
    • UI:
      Storage service management
  • Create user stor2rrd on the storage with monitor and standard roles, allow WBI.
    • CMD line method:
      Adjust password to your preferred one from used Test1234.
      $ ssh -l manage <storage_hostname>
      # create user interfaces wbi locale English password Test1234 roles monitor,standard stor2rrd
      
    • UI:
      Storage user management
    Note for some newer firmwares role "standard" is necessary for WBI access.

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC ➡ PowerVault ME4 ➡ WBI
    Dell EMC ME4 WBI Storage management

    If you set https in above storage properties then this must be enabled on the storage:
    $ ssh -l manage <storage_hostname>
    # show protocols
      ...
      Secure Web Browser Interface (HTTPS): Enabled
      ...
    
    If you use http then this:
      Web Browser Interface (HTTP): Enabled
    
  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh 
      =====================
      STORAGE: DotHill 
      =====================
      connection ok
    
    If you use HTTPS and do not have installed Perl SSL support then you get an error:
    "Missing LWP::Protocol::https", "Connection reset by peer" or "500 SSL negotiation failed"
    Follow this or switch to HTTP on the storage line in etc/storage-list.cfg.

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_dothillperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # DotHill Make suredSAN and its rebrands like Lenovo  S series or HPE MSA2000/P2000, Dell EMC PowerVault ME4 Series, Quantum StorNex
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_dothillperf.sh > /home/stor2rrd/stor2rrd/load_dothillperf.out 2>&1
    
    Ensure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.
In case of usage of Virtual Appliance
  • Use local account lpar2rrd for hosting of STOR2RRD on the virtual appliance
  • Use /home/stor2rrd/stor2rrd as the product home
STOR2RRD storage agent uses these EMC Metro node APIs:
  • Performance data via SSH: default Metro node data collectors available through SSH (port 22) : read only access
  • Configuration data via REST API: Metro node Element Manager API (port 443)
Note: for getting capacity data from the storage follow this docu

Prerequisites

  • Enable access from the STOR2RRD host to the EMC Metro node on ports 22 & 443 (TCP).
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 22
      Connection to "192.168.1.1" on port "22" is ok
    $ perl /home/stor2rrd/stor2rrd/bin/conntest.pl 192.168.1.1 443
      Connection to "192.168.1.1" on port "443" is ok
    
  • Create the stor2rrd account to the first node of your MN cluster:
    Switch to the root context with with this special command:
    sudo /usr/sbin/service-maintenance-window -f
    
    Create the sto2rrd account with the useradd command:
    useradd -m -d /home/stor2rrd -g users -G shadow,groupSvc,groupAllUsr,groupShellAccess -c 'stor2rrd' stor2rrd
    
    Make sure the created account will not expire.

  • SSH user access (select one of below methods during storage configuration in STOR2RRD UI)
    • User/Password
    • SSH keys
      • Create SSH keys if it does not exist yet in /home/stor2rrd/.ssh/id_rsa (type enter instead of passphrase)
        $ ssh-keygen -t rsa -N ""
          Generating public/private rsa key pair.
          Enter file in which to save the key (/home/stor2rrd/.ssh/id_rsa):
          ...
        
      • Assign password to the user
        admin@MN01:~> su - stor2rrd
          Password:
          Password change requested. Choose a new password.
          Old Password:
          New Password:
          Reenter New Password:
        
      • Exchange ssh keys
        $ ssh-copy-id stor2rrd@mn01
        
      • Test connection, you should login without typing of password:
        $ ssh mn01 -l stor2rrd
        stor2rrd@MN01:~> exit
        
        You have to end up in shell!
        If you end up in Metro node CLI then it is wrong, use above "set shell-access true" cmd.
        UI access to https://mn01 as stor2rrd does not work

  • Metro node apparently starts VPLEXcli automatically after log on.
    This must be disabled to allow login only to operating system.
    There is a way (perhaps commenting out starting VPLEXcli in .bash_profile or something like that), not sure here as for now.

  • Make sure that all monitors we use are running (collecting data), they are all default monitors and should run:
    VPlexcli:/> ll /monitoring/directors/*/monitors/
      /monitoring/directors/director-1-1-A/monitors:
      Name                                                            Ownership  Collecting  Period  Average  Idle   Bucket  Bucket  Bucket  Bucket
      --------------------------------------------------------------  ---------  Data        ------  Period   For    Min     Max     Width   Count
      --------------------------------------------------------------  ---------  ----------  ------  -------  -----  ------  ------  ------  ------
      director-1-1-A_PERPETUAL_vplex_sys_perf_mon_v19                 true       true        5s      4.97s    2s     -       -       -       64
      director-1-1-A_VIRTUAL_VOLUMES_PERPETUAL_MONITOR                true       true        1min    1min     33s    -       -       -       64
    
      /monitoring/directors/director-1-1-B/monitors:
      Name                                              Ownership  Collecting  Period  Average  Idle  Bucket  Bucket  Bucket  Bucket
      ------------------------------------------------  ---------  Data        ------  Period   For   Min     Max     Width   Count
      ------------------------------------------------  ---------  ----------  ------  -------  ----  ------  ------  ------  ------
      director-1-1-B_PERPETUAL_vplex_sys_perf_mon_v19   true       true        5s      5.05s    4s    -       -       -       64
      director-1-1-B_VIRTUAL_VOLUMES_PERPETUAL_MONITOR  true       true        1min    60s      33s   -       -       -       64
      ...
    
    If some do not running then use this procedure to enable it.

STOR2RRD storage configuration

  • All actions below under stor2rrd user (lpar2rrd on Virtual Appliance)

  • Add storage into configuration from the UI:
    Settings icon ➡ Storage ➡ New ➡ Vendor:device ➡ Dell EMC Metro node
    EMC Metro node storage setup

  • Make sure you have enough of disk space on the filesystem where is STOR2RRD installed
    Roughly you might count 2 - 30 GB per a storage (it depends on number of volumes, 30GB for 5000 volumes)
    $ df -g /home   # AIX
    $ df -h /home   # Linux
    
  • Test storage connectivity, either from the UI or from the command line:
    $ cd /home/stor2rrd/stor2rrd
    $ ./bin/config_check.sh EMC-Metro-node
      ===============================
      STORAGE: EMC-Metro-node: Metro-node
      ===============================
      connection ok
    
    If you get an error about missing LWP::Protocol::https then install as per this manual

  • Schedule to run storage agent from stor2rrd crontab (lpar2rrd on Virtual Appliance, it might already exist there)
    $ crontab -l | grep load_metronodeperf.sh
    $
    
    Add if it does not exist as above
    $ crontab -e
    
    # Dell EMC Metro node storage agent
    0,5,10,15,20,25,30,35,40,45,50,55 * * * * /home/stor2rrd/stor2rrd/load_metronodeperf.sh > /home/stor2rrd/stor2rrd/load_metronodeperf.out 2>&1
    
    Make sure there is already an entry with the UI creation running once an hour in crontab
    $ crontab -e
    
    # STOR2RRD UI (just ONE entry of load.sh must be there)
    5 * * * * /home/stor2rrd/stor2rrd/load.sh > /home/stor2rrd/stor2rrd/load.out 2>&1
    
  • Let run the storage agent for 15 - 20 minutes to get data, then:
    $ cd /home/stor2rrd/stor2rrd
    $ ./load.sh
    
  • Go to the web UI: http://<your web server>/stor2rrd/
    Use Ctrl-F5 to refresh the web browser cache.